Standards Watch
Search every BSI standard by number, title or status. Track what is current, under review, in draft or withdrawn.
26,780 standards · 3,359 under review · 1,406 in draft · 3,815 withdrawn
Get an email when your standards change
Pick the standards you work with. We email you when one is revised, withdrawn or replaced. Free, about once a month, unsubscribe any time.
Check your inbox. We sent a confirmation link to . Click it to start your alerts.
Loading full index…
matches across all standards
| Standard | Title | Status | Publication |
|---|---|---|---|
| ISO 48-8:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Apparent hardness of rubber-covered rollers by Pusey and Jones method | Current | 20 Aug 2018 |
| ISO 48-7:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Apparent hardness of rubber-covered rollers by Shore-type durometer method | Current | 20 Aug 2018 |
| ISO 48-9:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Calibration and verification of hardness testers | Current | 20 Aug 2018 |
| ISO 48-3:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Dead-load hardness using the very low rubber hardness (VLRH) scale | Current | 20 Aug 2018 |
| ISO 48-2:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Hardness between 10 IRHD and 100 IRHD | Current | 20 Aug 2018 |
| ISO 48-4:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Indentation hardness by durometer method (Shore hardness) | Current | 20 Aug 2018 |
| ISO 48-5:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Indentation hardness by IRHD pocket meter method | Current | 20 Aug 2018 |
| ISO 48-1:2018 | Rubber, vulcanized or thermoplastic. Determination of hardness - Introduction and guidance | Current | 20 Aug 2018 |
| ISO 10993-1:2018 | Biological evaluation of medical devices - Evaluation and testing within a risk management process | Withdrawn | 17 Aug 2018 |
| ISO 9644:2018 | Agricultural irrigation equipment. Pressure losses in irrigation valves. Test method | Under Review | 16 Aug 2018 |
| SAE AS 85049/152A:2023 | Connector Accessories, Electrical, Rfi/Emi, Strain Relief, 45°, Self-Locking, Category 3C (For Mil-Dtl-38999 Series Iii And Iv Connectors) | Current | 16 Aug 2018 |
| ISO/TS 13399-314:2018 | Cutting tool data representation and exchange - Creation and exchange of 3D models. Cartridges for indexable inserts | Current | 16 Aug 2018 |
| ISO 20975-2:2018 | Fibre-reinforced plastic compositess. Determination of laminate through-thickness properties - Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate, for carbon-fibre based systems | Under Review | 16 Aug 2018 |
| SAE AS 9375C:2018 | Gasket ? Metal O-Ring .094 Tube X .010 Wall, Silver Plated, Cres ? Uns S32100 | Current | 16 Aug 2018 |
| SAE ARP 5061A:2018 | Guidelines For Testing And Support Of Aerospace, Fiber Optic, Inter-Connect Systems | Current | 16 Aug 2018 |
| ISO/IEC 10373-3:2018 | Identification cards. Test methods - Integrated circuit cards with contacts and related interface devices | Current | 16 Aug 2018 |
| SAE AMS 5383F:2018 (R2023) | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated | Current | 16 Aug 2018 |
| ISO 19232-5:2018 | Non-destructive testing. Image quality of radiographs - Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators | Under Review | 16 Aug 2018 |
| SAE AS 8030:2018 | Requirements For An Electronic Materials And Processes Management Plan | Current | 16 Aug 2018 |
| ISO/TR 20218-1:2018 | Robotics. Safety design for industrial robot systems - End-effectors | Current | 16 Aug 2018 |
| ISO 16111:2018 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride | Current | 16 Aug 2018 |
| SAE AS 7997A:2018 | Motors, Aircraft Hydraulic, Constant Displacement General Specification For | Current | 15 Aug 2018 |
| SAE AMS 5354G:2018 (R2023) | Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 - 38 HRC | Current | 15 Aug 2018 |
| SAE AMS 5364D:2018 (R2023) | Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (Nb) (CF-8C) Solution Heat Treated | Current | 15 Aug 2018 |
| SAE AS 5148A:2018 | Assembly, Installation, And Torque For Flareless And Straight Thread Fluid Fittings And Tube Assemblies | Current | 14 Aug 2018 |
| SAE AS 27641D:2018 | Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty | Current | 14 Aug 2018 |
| SAE AS 4214B:2018 | Fitting, Cap Assembly, Beam Seal, Hydraulic | Current | 14 Aug 2018 |
| SAE AS 8439:2018 | Fitting, Cap Assembly, Beam Seal, Hydraulic, 5000 Psi | Current | 14 Aug 2018 |
| SAE AS 4213B:2018 | Fitting, Plug, Beam Seal, Hydraulic | Current | 14 Aug 2018 |
| SAE AS 8440:2018 | Fitting, Plug, Beam Seal, Hydraulic, 5000 Psi | Current | 14 Aug 2018 |
| SAE AS 4800C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Female To 45° Female | Current | 14 Aug 2018 |
| SAE AS 4797D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Female To 45° Male | Current | 14 Aug 2018 |
| SAE AS 4801C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Female To 90° Female | Current | 14 Aug 2018 |
| SAE AS 4798D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Female To 90° Male | Current | 14 Aug 2018 |
| SAE AS 4796D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Female To Straight Male | Current | 14 Aug 2018 |
| SAE AS 4802D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Male To 45° Female | Current | 14 Aug 2018 |
| SAE AS 4705D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Male To 45° Male | Current | 14 Aug 2018 |
| SAE AS 4803D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Male To 90° Female | Current | 14 Aug 2018 |
| SAE AS 4706D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Male To 90° Male | Current | 14 Aug 2018 |
| SAE AS 4704D:2018 | Hose Assembly, Lined Silicone, 125 Psi, Fixed Cavity Coupling, Potable Water, Straight Male To Straight Male | Current | 14 Aug 2018 |
| SAE AS 5503B:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless To Fixed Cavity, Potable Water | Current | 14 Aug 2018 |
| SAE AS 4472C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, 45° To 45° | Current | 14 Aug 2018 |
| SAE AS 4473C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, 45° To 90° | Current | 14 Aug 2018 |
| SAE AS 4474C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, 90° To 90° | Current | 14 Aug 2018 |
| SAE AS 4476C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight Male To 45° Female | Current | 14 Aug 2018 |
| SAE AS 4477C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight Male To 90° Female | Current | 14 Aug 2018 |
| SAE AS 4475C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight Male To Straight Female | Current | 14 Aug 2018 |
| SAE AS 4478C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight Male To Straight Male | Current | 14 Aug 2018 |
| SAE AS 4470C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight To 45° | Current | 14 Aug 2018 |
| SAE AS 4471C:2018 | Hose Assembly, Lined Silicone, 125 Psi, Flareless, Potable Water, Straight To 90° | Current | 14 Aug 2018 |
Data is sourced from BSI's published catalogue and may not reflect the current position. Status and dates change without notice — verify directly with BSI before relying on any entry. This listing is provided for information only and does not constitute professional or compliance advice. ITMAD accepts no liability for any action taken in reliance on it.