Standards Watch
Search every BSI standard by number, title or status. Track what is current, under review, in draft or withdrawn.
26,481 standards · 3,357 under review · 1,375 in draft · 3,588 withdrawn
Get an email when your standards change
Pick the standards you work with. We email you when one is revised, withdrawn or replaced. Free, about once a month, unsubscribe any time.
Check your inbox. We sent a confirmation link to . Click it to start your alerts.
Loading full index…
matches across all standards
| Standard | Title | Status | Publication |
|---|---|---|---|
| ASTM D8270 - 26 | Standard Terminology Relating to Cannabis | Current | 1 May 2026 |
| ASTM D1079 - 26b | Standard Terminology Relating to Roofing and Waterproofing | Current | 1 May 2026 |
| ASTM E253 - 26 | Standard Terminology Relating to Sensory Evaluation of Materials and Products | Current | 1 May 2026 |
| ASTM B916 - 01(2026) | Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal | Current | 1 May 2026 |
| ASTM D7607/D7607M - 26 | Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) | Current | 1 May 2026 |
| ASTM D4382 - 18(2026) | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace | Current | 1 May 2026 |
| ASTM D5776 - 26 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration | Current | 1 May 2026 |
| ASTM D2726/D2726M - 26 | Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures | Current | 1 May 2026 |
| ASTM D2414 - 26 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) | Current | 1 May 2026 |
| ASTM D5405/D5405M - 98(2026) | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material | Current | 1 May 2026 |
| ASTM C188 - 26 | Standard Test Method for Density and Relative Density of Hydraulic Cement | Current | 1 May 2026 |
| ASTM E279 - 26 | Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test | Current | 1 May 2026 |
| ASTM D3606 - 26 | Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography | Current | 1 May 2026 |
| ASTM D5580 - 26 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography | Current | 1 May 2026 |
| ASTM D7806 - 26 | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Using Mid-Infrared Spectroscopy (FTIR Transmission Method) | Current | 1 May 2026 |
| ASTM D7371 - 26 | Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) | Current | 1 May 2026 |
| ASTM D7875 - 26 | Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography | Current | 1 May 2026 |
| ASTM D7861 - 26 | Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy | Current | 1 May 2026 |
| ASTM D6730 - 26 | Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography | Current | 1 May 2026 |
| ASTM D4893 - 26 | Standard Test Method for Determination of Pitch Volatility | Current | 1 May 2026 |
| ASTM D4746 - 26 | Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration | Current | 1 May 2026 |
| ASTM D8666 - 26 | Standard Test Method for Determination of Rutting Resistance Using High Temperature Indirect Tensile (HT-IDT) Strength of Asphalt Mixtures | Current | 1 May 2026 |
| ASTM D8649 - 26 | Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry | Current | 1 May 2026 |
| ASTM D8667 - 26 | Standard Test Method for Determining Intermediate and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR) | Current | 1 May 2026 |
| ASTM D8650/D8650M - 26 | Standard Test Method for Determining Low-Temperature Flexibility of Liquid-Applied Polymeric Membranes Used in Roofing and Waterproofing | Current | 1 May 2026 |
| ASTM G47 - 26 | Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products | Current | 1 May 2026 |
| ASTM E803 - 20(2026) | Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams | Current | 1 May 2026 |
| ASTM D8668 - 26 | Standard Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test | Current | 1 May 2026 |
| ASTM D2764 - 26 | Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch | Current | 1 May 2026 |
| ASTM D4867/D4867M - 26 | Standard Test Method for Effect of Moisture on Asphalt Mixtures | Current | 1 May 2026 |
| ASTM D7063/D7063M - 26 | Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples | Current | 1 May 2026 |
| ASTM E3494 - 26 | Standard Test Method for Effectiveness of Antifoaming Agents for Agriculture Tank Mix | Current | 1 May 2026 |
| ASTM D5182 - 26 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG A/8.3/90 Method) | Current | 1 May 2026 |
| ASTM F1060 - 26 | Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR) | Current | 1 May 2026 |
| ASTM D8606 - 26 | Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Modified Continuously Closed Cup (MCCCFP) Tester | Current | 1 May 2026 |
| ASTM E2912 - 26 | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction | Current | 1 May 2026 |
| ASTM F3146 - 26 | Standard Test Method for Impact Attenuation of Turf Playing Systems Designated for Rugby | Current | 1 May 2026 |
| ASTM D7279 - 26a | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer | Current | 1 May 2026 |
| ASTM D3336 - 26 | Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures | Current | 1 May 2026 |
| ASTM C539 - 84(2026) | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method | Current | 1 May 2026 |
| ASTM C1702 - 26 | Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry | Current | 1 May 2026 |
| ASTM D7115 - 20(2026) | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading | Current | 1 May 2026 |
| ASTM D2821 - 26 | Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus | Current | 1 May 2026 |
| ASTM D8637/D8637M - 26 | Standard Test Method for Mode I Dominant Facesheet-to-Core Fracture Toughness of Sandwich Constructions | Current | 1 May 2026 |
| ASTM D2700 - 26 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel | Withdrawn | 1 May 2026 |
| ASTM B761 - 26 | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation | Current | 1 May 2026 |
| ASTM F3846 - 26 | Standard Test Method for Sieve Analysis of Granular Infill Materials for Artificial Turf Surfaces | Current | 1 May 2026 |
| ASTM D2319/D2319M - 26 | Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) | Current | 1 May 2026 |
| ASTM D3920 - 18(2026) | Standard Test Method for Strontium in Water | Current | 1 May 2026 |
| ASTM C1201/C1201M - 26 | Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference | Current | 1 May 2026 |
Data is sourced from BSI's published catalogue and may not reflect the current position. Status and dates change without notice — verify directly with BSI before relying on any entry. This listing is provided for information only and does not constitute professional or compliance advice. ITMAD accepts no liability for any action taken in reliance on it.