Testing
Testing Services in Dubai & Abu Dhabi
Non-destructive testing, leak detection, material verification and laboratory analysis — carried out on site, in fabrication yards and offshore across the UAE, to the standard your specification calls up.
21 services
AAMA 501.2 Water Penetration Field Check
AAMA 501.2 leak detection field check for installed glazing and curtain wall. Calibrated water spray locates leaks in glazing seals and frame joints on site.
Calibration
Instrument calibration and repair in the UAE: temperature, pressure, electrical, gas detection, dimensional and mass. On-site or in-lab, with traceable certificates.
Dye Penetrant Testing
Dye penetrant testing (PT/LPI) for surface-breaking defects in welds and castings. ISO 17020 accredited, ADNOC approved, to ASTM E165 and ISO 3452.
Eddy Current Testing
Eddy current testing (ECT) for surface cracks through paint and coatings. ISO 17020 accredited, ADNOC approved, Dubai and Abu Dhabi.
Ferrite Testing & Measurement
Ferrite testing and content measurement on duplex stainless welds to AWS A4.2 and ISO 8249. Feritscope, reported in FN or percent ferrite. UAE.
Heat Exchanger Tube Leak Testing Services
Heat exchanger tube leakage testing UAE: helium mass spectrometry, tracer gas, acoustic and pressure decay methods. Individual tubes pinpointed for repair.
Helium Leak Testing Services
Helium leak testing services in Dubai and Abu Dhabi: sniffing, hard vacuum and hood methods by EIAC-accredited ITMAD. Leak rates to 1×10⁻¹² mbar·l·s⁻¹.
Laboratory Testing
Laboratory testing coordinated by ITMAD through ISO/IEC 17025 accredited partner laboratories: mechanical, chemical, metallurgical and contamination analysis, with method selection and interpretation against your specification.
Leak Testing Services
Leak testing services UAE to ASME V Article 10 and ASTM standards: bubble emission, pressure decay, vacuum decay, fluorescent dye and tracer gas methods.
Magnetic Particle Testing
Magnetic particle testing and inspection (MPI/MT) for surface and near-surface cracks in ferrous materials. ASTM E1444, ISO 9934, ASME V Article 7. UAE.
Material Identification & PMI Testing
Positive material identification (PMI) by XRF and OES to ASTM E1476, E572 and API 578. Alloy verification and grade confirmation on site across the UAE.
PAUT Inspection — Phased Array Ultrasonic Testing
Phased array ultrasonic testing (PAUT) inspection for welds, small bore tubing and complex geometry. Encoded scanning, qualification blocks, UAE and GCC.
Portable Hardness Testing Services
Portable hardness testing services UAE. Brinell, Leeb, Rockwell, Vickers and UCI methods to ASTM E110, ISO 18265. PWHT and NACE sour service verification.
Product Testing & Certification UAE
Product testing UAE for ECAS, G-Mark and SABER certification. Safety, electrical and chemical testing through ISO 17025 accredited laboratories.
Rope Access Structural Inspection & NDT
Rope access structural inspection, NDT and coating survey at height across Dubai, Abu Dhabi and UAE. IRATA certified teams, ISO 9712 qualified inspectors.
Stainless Steel Contamination Testing
Stainless steel contamination testing UAE. Ferroxyl and copper sulphate free-iron tests to ASTM A380 and A967, halide and low-melting-point metal checks. On site or laboratory.
Time of Flight Diffraction
Time of Flight Diffraction (TOFD) for accurate flaw sizing and through-wall height measurement in welds. Encoded, imaged and fully recorded, to ISO 10863 and ASME V Article 4.
Ultrasonic Testing Services
Ultrasonic testing services for flaw detection, wall thickness, corrosion mapping and lamination. ASME V, ASTM, EN and ISO standards. UAE.
Vacuum Box Testing
Vacuum box testing for tank floor welds and seams accessible from one side. Bubble emission to ASME V Article 10, ASTM E515 and API 650. UAE.
Visual Testing (VT) Services
Visual testing (VT) of welds, castings and components UAE to ASME V Article 9, ISO 17637 and AWS D1.1. Remote and borescope examination by ISO 9712 qualified inspectors.
Workplace Noise Survey & Exposure Assessment
Workplace noise survey and occupational noise exposure assessment UAE. Area mapping, octave band analysis and dosimetry with hearing protection recommendations.
Looking for something else? See all capabilities.